Q:
Why has my pool water developed fouling odour / colour or becomes
dirty?
A: This is mainly
due to lack of chlorine.
• Faulty or improper chlorination
• Low stabilizer level
• Due to clogged filters, reduction in water circulation /
flow to your pool
• Sufficient concentration of chlorine solution or enough
chlorine is not added.
Q: Why are
pools so much trouble to keep clean?
A: A well BALANCED
POOL is a breeze to keep clean. The basics of proper pool maintenance
are
• Firstly - maintain a chlorine residual
of 1.0 ppm min. (use Noble
Chlor™ Swimming
Pool & Spa Chlorinator)
• Second - maintain the pH at 7.6 – 7.8
• Third - ensure a calcium hardness level of < 200 ppm
This is called as BALANCED POOL in which you will
have little or no further chemical maintenance requirement.
Q: What causes
my kids eyes to sting / irritating?
A: The most likely
cause of this is an incorrectly adjusted pH level. Whilst a very
high chlorine level could be at fault, it is very likely that the
chlorine solution must not have achieved homogeneity when mixed
it to the entire pool volume. Using Noble
Chlor Swimming Pool
& Spa Chlorinator can avoid such occurrence.
Q: Whether
Electro chlorination is an established process?
A:
Yes, Electro chlorination is an established process and has been
in use world wide for domestic as well as Industrial applications
for more than 3 decades. It is safe, efficient & user-friendly
process compared to other conventional type of disinfection processes
such as gaseous chlorination, bleaching powder usage and chlorine
tablets etc.
Q: Why a Salt
Water chlorinator? (Noble
Chlor Swimming
Pool & Spa Chlorinator)
A: Noble
Chlor Swimming Pool
& Spa Chlorinator Pool chlorinators helps in sanitizing the
pool water by effectively killing the potential health hazards like
bacteria, algae and other microorganisms and it will keep the pool
clean and safe.
Q: Good reasons
to put a Noble
Chlor Swimming
Pool & Spa Chlorinator system on your pool.
A:
a. Cost effective
b. No itching skin and red eyes
c. No need to purchase chlorine
d. Eco friendly system
e. Sparkling clear pool water
f. No handling or storage of hazardous chemicals.
Q: How does
Noble Chlor
Swimming Pool & Spa Chlorinator work?
A:
The electrolytic cell provided along with the Noble
Chlor Swimming Pool
& Spa Chlorinator system is plumbed with the existing circulation
piping systems of the swimming pool across the filter as a bypass
line. Depending upon the pool capacity, a small amount of common
salt is dissolved in the pool water. When filtration system is online
with water flowing through the electrolytic cell, DC power is fed
to the cell from the Noble
Chlor Swimming Pool
& Spa Chlorinator control panel and it generates Chlorine in
the form of sodium hypochlorite, which is a powerful sanitizer.
The hypochlorite generated oxidizes, the bacteria and sanitizes
the pool water.
Q: Is Noble
Chlor an economical
system?
A:
Yes, this method of chlorination is the most economical process
compared to other conventional type of disinfection processes like
gaseous chlorination, bleaching powder, chlorine tablets and commercial
hypo etc. Although, the capital cost for this system is little on
the higher side, the initial investment is recovered very shortly
due to its reliability and consistency in sanitizing.
Q: How much
salt has to be added in the pool?
A:
Initially, a salt concentration 3000 ppm has to be maintained in
the swimming pool at the time of installation of Noble
Chlor Swimming Pool
& Spa Chlorinator system. You may only have to top up salt level
a few times a year. The amount of salt needed to top up and maintain
a concentration of 3000 ppm can be determined from the salt balance
table given in the operation manual of the Noble
Chlor Swimming Pool
& Spa Chlorinator.
Q: How much
chlorine is produced?
A: Generation of chlorine
can be adjusted and varied using Timer settings located at theNoble
Chlor Swimming Pool
& Spa Chlorinator control system. And also, it depends on the
model of the system you have purchased.
Q: How long
should it operate each day?
A:
For heavy bathers load, the Noble
Chlor Swimming Pool
& Spa Chlorinator system just like your pool should operate
the same amount of hours as your filter circulation pump. Normally
this is 24 hours per day for commercial pools. For normal bathers
load, the system should operate for 3 – 4 hours per day when
the filter circulation pump is running. However it is advisable
to refer the Operation Manual with your supply for specific data.
Q: Should
chlorine stabilizers be used?
A: Yes, definitely
chlorine stabilizer should be used as with all chlorine pools, stabilizer
will minimize the loss of residual chlorine in the pool due to the
effect of sun and will assist the chlorinator in completing its
task with greater ease. We recommend to use cyanuric acid as stabilizer
for swimming pools & spas. Please refer our operation manual
for stabilizer balance table. Normally, 80 ppm concentration of
cyanuric acid should be maintained in the pool.
Q:How does
the Noble
Chlor Swimming
Pool & Spa Chlorinator system help my health?
A: Noble
Chlor Swimming Pool
& Spa Chlorinator system continuously keeps your pool clean,
odor free and healthy. No dangerous side products like chloramines
is generated. And also, the added common salt is having its own
theraptic action to human health and skin.
Q: Does the
salt damage pool equipment?
A: No. Low levels
of salt will not create any damages like corrosion to any of the
equipments used in pool circulation system.
Q: How do
I maintain the electrolytic cell?
A: The cell should
be inspected for cleanliness every 3 months. To inspect the cell,
first be sure that the filter pump is turned off and DC power feed
to electrolytic cell is cut off. Close the isolation valves and
remove the cell from the connecting parts. Look inside the cell,
if you see any build up of calcareous deposits on the electrodes
surface, cleaning should be done. Refer Operation Manual for clear
procedure which is very simple.
Q: Who can
install the Noble
Chlor Swimming
Pool & Spa Chlorinator system?
A: The Noble
Chlor Swimming Pool
& Spa Chlorinator system requires some plumbing and electrical
work to install, this is best left to professional. Additional cost
for installation would be nominal. Since, most pools have maintenance
worker on site, it is a simple installation procedure if they follow
the step by step procedure provided in the Operation Manual.
Q: What about
all the other pool devices in the market?
A: There are many
devices that claim to keep pools clear and sterile. Some work well,
others do nor work very well. Generally, Electro Chlorination is
the only long term solution for those who want a simple pool care
regime. Magnetic devices copper and silver electrodes and other
devices are out dated.
Q:
What is meant when they say “chlorine free”?
A: Unlike Gaseous
chlorine application, Noble
Chlor pools are essentially
free from chlorine in the sense that the action involved is only
using the nascent oxygen, evolved from the generated (NaoCl) sodium
hypochlorite by electrolysis, from Noble
Chlor Swimming Pool
& Spa Chlorinator. Thus, Noble
Chlor pools are “chlorine
free” at the same time more effective in sanitizing and eco
friendly in application.
Q: Will salt
affect equipment and the pool finish?
A: In fact, salt is
compatible with all pool finishes and almost all pool equipment
manufactured today is salt compatible.
Q: What is
the best time to run my Noble
Chlor Swimming
Pool & Spa Chlorinator system?
A: In a saltwater
pool, the chlorine is manufactured by the Electrochlorinator chlorinator
as the pump is running, providing a “trickle feed” into
your pool. Since chlorine is affected by UV light it can disappear
as quickly as it is made if the pump is running during the day.
For this reason, it is generally recommended that the pump is set
to run in the early mornings and late afternoons when the sunlight
is not as strong. This will only ensure economical operation. |
